A/C Compressor Fits John Deere Tractors OEM 6E171 12 Volt CO-1005CA

Product Description

OUR PRODUCTYou are purchasing a New A/C Compressor.SEE COMPATIBILITY  We would appreciate if you could leave us a note with the vehicle specification (Year, Make, Model and Engine) in PayPal when making the payment, in that way we can reassure that the a/c compressor will fit properly.If your are unsure what a/c compressor would fit in your vehicle, please do not hesitate to contact us by emailWARRANTY AND COMPRESSOR INSTALLATION GUIDE1 Year A/C Warranty & AgreementFollow all local, state and federal regulations when servicing mobile A/C systems and read this instruction prior to starting any repairs.Oil charges and oil types should be closely adhered to for proper A/C performance.If you are uncertain of OIL CHARGE OR REFRIGERANT TOTAL SYSTEM CHARGE refer to the under hood decal or, OEM service manual.USE ONLY R-12 OR R-134a REFRIGERANT.1.   Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.2.   Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.WARNING: NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, IF NO IMPOSSIBLE TO FLUSH. IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.3.   Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what  oil is in there too,4.   Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.5.   Install new receiver drier or accumulator and new orifice tube or expansion valve.6.   Evacuate the A/C system for a minimum of one hour.7.   After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.8.   Start engine whit A/C controls on MAX AIR with door and windows open.9.   Add the remaining charge of refrigerant as called for by the manufacture.RETURN POLICYAll returns within 30 days will be subject to 15% restocking fee.Any warranty after 30 days, customer must pay all shipping charge.All returns must be pre- approved.Item must be new, resalable condition and in original box.SHIPPINGFree ground shipping to the continental US Shipment to Alaska, Hawaii, Puerto Rico, Virgin Island and Guam do not qualify for sales. YOUR SATISFACTION IS OUR MAIN GOAL